{"id":712,"date":"2026-11-10T14:24:32","date_gmt":"2026-11-10T06:24:32","guid":{"rendered":"http:\/\/www.1688code.com\/blog\/?p=712"},"modified":"2026-11-10T14:24:32","modified_gmt":"2026-11-10T06:24:32","slug":"what-software-is-used-to-control-a-jig-machine-469e-079bd1","status":"publish","type":"post","link":"http:\/\/www.1688code.com\/blog\/2026\/11\/10\/what-software-is-used-to-control-a-jig-machine-469e-079bd1\/","title":{"rendered":"What software is used to control a Jig Machine?"},"content":{"rendered":"

If you\u2019ve ever stepped onto a production floor and watched a jig machine hold a delicate aluminum aerospace part perfectly still while a mill cuts a precision groove within a 0.001-inch tolerance, you\u2019ve probably wondered: what\u2019s actually controlling that level of accuracy? As a jig machine supplier who\u2019s spent 12 years troubleshooting, upgrading, and installing these systems for shops ranging from small job shops to Fortune 500 aerospace manufacturers, I\u2019ll tell you it\u2019s not just a single software\u2014it\u2019s a layered ecosystem, each tool serving a specific job, and picking the wrong one can cost you thousands in scrap, downtime, or rework. Jig Machine<\/a><\/p>\n

<\/p>\n

Let\u2019s start with what a jig machine even does, for anyone new to the space. Unlike generic CNC mills, jig boring machines (the most common type of jig machine today) are built to drill, bore, and ream holes with extreme concentricity and location accuracy\u2014critical for jigs and fixtures that hold parts during assembly, mold cores, or automotive transmission housings where misaligned holes mean a part that leaks or fails on impact. So if jig machines are built for precision, the software running them has to match that rigor.<\/p>\n

First, there\u2019s the core control software that runs on the machine itself. When I sell a jig machine, the first question I ask a new customer is: what\u2019s their existing CAD\/CAM stack? Most of the time, they\u2019re not starting from scratch, but I\u2019ve seen shops try to force a generic CNC controller into a jig machine\u2019s tight tolerance specs and end up with scrap parts. The most common controller software we pair with our jig boring mills is Siemens Sinumerik 840D sl. Why? Because its \u201cJig Boring Cycle\u201d module is pre-programmed to handle the unique needs of this machine type. Unlike a standard G-code that just moves a tool from point A to B, Sinumerik\u2019s module compensates for thermal expansion (a big issue when a 10,000-pound machine warms up over a 12-hour run) and lets operators adjust hole locations in real time without re-coding an entire program. Last year, we installed a 840D sl system at a Detroit job shop that was seeing 15% scrap on transmission jig plates; within two weeks, their scrap rate dropped to 1.2%. That\u2019s not luck\u2014it\u2019s the control software built for the job.<\/p>\n

But wait\u2014you can\u2019t just type G-code on a Sinumerik and expect perfect parts. That\u2019s where the second layer comes in: CAM software, which turns a part\u2019s digital design into the precise toolpaths the jig machine follows. For jig work, generic CAM tools like Mastercam or Fusion 360 might work for simple parts, but they lack the specialized cycles needed for jig boring. Over the years, we\u2019ve seen two CAM tools stand out for our customers: Tebis and hyperMILL. Tebis is a favorite for large aerospace shops because it has a dedicated \u201cJig and Fixture\u201d module that lets users import a solid model of a part, define every hole\u2019s location, and automatically generate toolpaths that account for the jig machine\u2019s axis offsets and table runout. A customer in Seattle that makes wing jigs for Boeing switched to Tebis two years ago; they now take 30% less time to program a new jig, and their hole location accuracy is so consistent they no longer do post-cut inspection on 80% of their parts. hyperMILL, on the other hand, is better for high-volume shops making small, repetitive jigs. Its \u201c5-axis Jig Boring\u201d cycle cuts toolpath calculation time in half compared to competing tools, which is a huge win when you\u2019re running 200 small aluminum jig plates a week.<\/p>\n

A lot of new customers ask me why we don\u2019t just use one all-in-one CAD\/CAM\/controller system. The truth is, for most jig machine applications, the best results come from integration\u2014not a single tool. That\u2019s why we work with our customers to make sure their CAD (AutoCAD or SolidWorks, for most) exports seamlessly to their CAM, which in turn posts G-code tailored to their jig machine\u2019s controller. Last year, we had a customer try to use a closed all-in-one system; when their lead engineer left, no one else on the shop floor could adjust toolpaths without calling the company\u2019s support team, which took 48 hours to respond. Now they use SolidWorks for design, Tebis for CAM, and Sinumerik for control\u2014each tool speaks the same language, so their operators can troubleshoot a toolpath issue in 10 minutes instead of a day.<\/p>\n

Wait, but what about inspection software? Jig machine work isn\u2019t just about cutting the part\u2014it\u2019s about verifying it\u2019s correct. For a jig machine, a single misaligned hole can ruin a $10,000 fixture, so having software that ties the machine\u2019s control system to your inspection tools is non-negotiable. That\u2019s why we recommend joining the control software to a coordinate measuring machine (CMM) platform like Verisurf or Zeiss Calypso. For example, if a jig machine cuts a hole 0.002 inches off location, the CMM will pick that up, and the control software can adjust the next hole\u2019s location automatically\u2014no manual rework needed. I learned this lesson the hard way early in my career; a customer had a jig machine that cut 200 jigs before anyone noticed a hole was misaligned, because they didn\u2019t tie their CMM to the machine\u2019s controller. That mistake cost them $50,000 in scrap. Now, every jig machine we sell includes a software integration kit to connect the control system to the shop\u2019s CMM.<\/p>\n

Of course, there\u2019s a side of software that doesn\u2019t make the part itself, but keeps the machine running: monitoring and maintenance software. Jig machines are high-precision, and downtime can cost a shop $2,000 a day in lost production. That\u2019s why we offer our customers a proprietary machine monitoring platform (I can\u2019t call it an app, because it\u2019s fully integrated into the machine\u2019s controller) that tracks spindle wear, thermal expansion, and runtime in real time. Last quarter, a customer in Toronto got an alert from the platform that their jig machine\u2019s spindle was showing 10% excess wear; they replaced it during a scheduled shift, avoiding a 36-hour unplanned downtime that would have cost them $72,000. We\u2019ve also seen customers use this software to optimize their production runs: one shop found they could run three jig jobs back-to-back without warming the machine up, cutting their total run time by 12%.<\/p>\n

Now, let\u2019s talk about the common mistakes I see customers make when choosing software for their jig machine. The first is trying to use consumer-level CAD\/CAM tools for high-tolerance work. Fusion 360 is great for hobbyists, but it doesn\u2019t have the post-processing options or cycle control for jig boring, which leads to toolpaths that cause chatter or misaligned holes. The second mistake is not integrating all your software layers. A lot of shops buy a fancy CAM tool but don\u2019t make sure it posts G-code correctly for their controller, leading to crashes that damage the jig machine\u2019s precision. The third mistake is skipping the monitoring software. A jig machine\u2019s accuracy drops as it wears, and without real-time data, you won\u2019t catch that until you\u2019re holding a bad part.<\/p>\n

As a jig machine supplier, our job isn\u2019t just to sell you a machine\u2014it\u2019s to help you choose the software that works for your shop. Whether you\u2019re a small job shop with 2 employees making tooling for local manufacturers, a mid-sized shop making automotive jigs, or a large aerospace firm with strict tolerances, we don\u2019t push a one-size-fits-all software stack. We\u2019ll sit down with you, walk through your current production flow, and recommend the combination of controller, CAM, and monitoring software that fits your needs. If you\u2019re tired of scrap parts, long programming times, or unplanned downtime on your jig machines, we\u2019re here to help you find the right software solution for your operation.<\/p>\n

<\/p>\n

Don\u2019t let the complexity of jig machine software hold your production back. Contact us today to discuss your jig machine needs and find the perfect software integration for your shop.<\/p>\n

Feeder<\/a> References<\/p>\n

    \n
  1. \u201cJig Boring Technology and Precision Control,\u201d Manufacturing Engineering Association, 2022.<\/li>\n
  2. Siemens Sinumerik 840D sl Jig Boring Module Technical Manual, Siemens AG, 2023.<\/li>\n
  3. Tebis Jig and Fixture CAM Module Case Studies, Tebis AG, 2024.<\/li>\n
  4. hyperMILL 5-Axis Machining for Jig Production, OPEN MIND Technologies, 2023.<\/li>\n
  5. Verisurf CMM Integration for CNC Machine Tools, Verisurf Software Inc., 2022.<\/li>\n<\/ol>\n
    \n

    Jiangxi Well-tech International Mining Equipment Co., Ltd.<\/a>
    Jiangxi Well-tech International Mining Equipment Co., Ltd. is one of the most professional jig machine manufacturers and suppliers in China, featured by quality products and good service. Please rest assured to wholesale customized jig machine at competitive price from our factory.
    Address: Guzhang Industrial Park of Shicheng County, Ganzhou City, Jiangxi Province, China
    E-mail: mily@benefication.com
    WebSite:     https:\/\/www.cn-welltech.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019ve ever stepped onto a production floor and watched a jig machine hold a delicate … What software is used to control a Jig Machine?<\/span>Read more<\/a><\/p>\n","protected":false},"author":191,"featured_media":712,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[672],"class_list":["post-712","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-jig-machine-46ec-07ca5c"],"_links":{"self":[{"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/posts\/712","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/users\/191"}],"replies":[{"embeddable":true,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/comments?post=712"}],"version-history":[{"count":0,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/posts\/712\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/posts\/712"}],"wp:attachment":[{"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/media?parent=712"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/categories?post=712"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.1688code.com\/blog\/wp-json\/wp\/v2\/tags?post=712"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}